Windows 10 Missing bluetooth icon on tasktray

Windows 10

1. Click Start
2. Type Settings and open it
3. Click Devices
4. At the right of the Devices window, click More Bluetooth Options
5. Under the Options tab, tick 'Show the Bluetooth icon in the notification area'
6. Click OK. The icon appears on tasktray

static IP on TD-W8960N

Enter router web portal (see gateway IP using ipconfig in windows command prompt )
Goto advanced setup
Goto Lan
Under Enable DHCP shows "Static IP Lease List", click Add.
On the "DHCP Static IP Lease" page:
Enter MAC (using format XX:XX:XX:XX:XX:XX)
Enter IP
Click save.

Note find your PC's mac using ipconfig /all in windows command prompt.

p8z68 error beeps

1. Power Light is ON, "One short beep" from speaker but nothing shows on monitor

One short beep from the speaker means the device boots normally. Please confirm the monitor is working and correctly connected to the device.

2. Power Light is ON, "No beep" from speaker

Please check that the CPU and memory are installed correctly and there's no oxidation on the connection parts. If there is any oxidation, please try to wipe the oxidized part with an eraser. If it still cannot be turned on properly, please clean it with contact cleaner and re-install.

3. "One long and two short beeps" from speaker

An anomaly is detected in memory. Please confirm that the memory is correctly installed.
Please refer to the Motherboard manual for related instructions about memory.

4. "One long and three short beeps" from speaker

An anomaly is detected in the graphic card. If the graphic card needs an extra power supply, please ensure the power supply can provide enough wattage.

5. "One long and four short beeps" from speaker

An anomaly is detected on CPU Fan Error or CPU  Over Temperature Error or CPU Over Voltage Error

Please ensure your CPU and CPU Fan is installed correctly, if still fail, please enter BIOS to load default BIOS or clear CMOS to try again